Throughout September, get £10 off each BM4 & BR4 Leister igniter. Offer ends 30th September. Use code: LEISTER10. Dismiss
EX VAT
INC VAT
LoCO2 Heat are pre-insulated pipe and district heating specialists, and have direct relationships with the following pipe suppliers; Rehau, Uponor and CPV in Pex, copper and stainless steel.
We specialise in the supply of underground pre-insulated pipe and fittings for heat distribution and cooling networks. It also commonly gets referred to as underground heat main or district heating pipe, but whatever you decide to call it, we supply it.
District heating networks are the most common use for pre-insulated pipe. This is essentially where a single centralised heat source such as a biomass boiler, is used to heat multiple buildings as opposed to using single boilers in each. Here, pre-insulated pipe is used to connect the single heat source to multiple buildings to provide all the heat and hot water requirements. District heating networks have become increasingly popular, with many new build estates heated via this sort of network as not only can the capital cost overall be less, but it is considered a more efficient way of heating buildings so lowers operation cost and helps minimise carbon emissions.
Showing 65–80 of 258 results
Rauthermex Heat-Shrink End Cap The Rehau Rauthermex heat-shrink end cap is suitable for protecting the foamed pipe ends against moisture. Fits Rauthermex Uno pipe 160/250.
Rauthermex Heat-Shrink End Cap. The Rehau Rauthermex Heat-Shrink end cap is suitable for protecting the foamed pipe ends against moisture. Fits Rauthermex Uno pipe 25/91, 32/91, 32/111, 40/91, 40/126 & 50/111.
Rauthermex Heat-Shrink End Cap The Rehau Rauthermex heat-shrink end cap is suitable for protecting the foamed pipe ends against moisture. Fits Rauthermex Uno pipe 63/126.
Rauthermex Heat-Shrink End Cap The Rehau Rauthermex heat-shrink end cap is suitable for protecting the foamed pipe ends against moisture. Fits Rauthermex Uno pipe 75/162, 90/162, 90/182, 110/162, 110/182, 110/202, 125/182, 125/202 & 140/202.
Rauthermex I-Shroud for Straight Connections The RAUTHERMEX I-Shroud Set includes: Shroud set made from ABS 12 or 22 clips made from POM Dsroud plugs made from POM including valve, sealing ring and plug (2) Shroud Glue Assembly instructions You will also need a foam kit & two sealing rings of the corresponding size.
Rauthermex I-Shroud for Straight Connections The RAUTHERMEX I-Shroud Set includes: Shroud set made from ABS 12 or 22 clips made from POM shroud plugs made from POM including valve, sealing ring and plug (2) Shroud Glue Assembly instructions You will also need a foam kit & two sealing rings of the corresponding size.
Rauthermex L-Shrould For Elbow Connections – Large Shroud set made from ABS 14 or 22 clips made from POM Shroud plugs made from POM including valve, sealing ring and plug (2) Shroud Glue Assembly instructions You will also need a foam kit & two sealing rings of the corresponding size.
Rauthermex L-Shroud for Elbow Connections – Small The RAUTHERMEX L-Shroud Set includes: Shroud set made from ABS 14 or 22 clips made from POM Shroud plugs made from POM including valve, sealing ring and plug (2) Shroud glue Assembly instructions You will also need a foam kit & two sealing rings of the corresponding size.
Rauthermex Rubber End Cap The Rehau Rauthermex Rubber end cap is suitable for the protection of foamed pipe ends from moisture. Fits Rauthermex Duo pipe 20+20/111, 25+25/111 & 32+32/111.
Rauthermex Rubber End Cap The Rehau Rauthermex Rubber end cap is suitable for the protection of foamed pipe ends from moisture. Fits Rauthermex Duo pipe 32+32/126 & 40+40/126.
Rauthermex Rubber End Cap for Duo Pipe ø162 Rauthermex Rubber End Cap The Rehau Rauthermex Rubber end cap is suitable for the protection of foamed pipe ends from moisture. Fits Rauthermex Duo pipe 50+50-162
Rauthermex Rubber End Cap The Rehau Rauthermex Rubber end cap is suitable for the protection of foamed pipe ends from moisture. Fits Rauthermex Duo pipe 50+50/182 & 63+63/182.
Rauthermex Rubber End Cap The Rehau Rauthermex Rubber end cap is suitable for the protection of foamed pipe ends from moisture. Fits Rauthermex Uno pipe 32/111 & 50/111.
Rauthermex Rubber End Cap The Rehau Rauthermex Rubber end cap is suitable for the protection of foamed pipe ends from moisture. Fits Rauthermex Uno pipe 40/126, 50/126 & 63/126.
Rauthermex Rubber End Cap The Rehau Rauthermex Rubber end cap is suitable for the protection of foamed pipe ends from moisture. Fits Rauthermex Uno pipe 75/162, 90/162 & 110/162.
Rauthermex Rubber End Cap The Rehau Rauthermex Rubber end cap is suitable for the protection of foamed pipe ends from moisture. Fits Rauthermex Uno pipe 90/182, 110/182 & 125/182.
LoCO₂ Heat has a team of highly knowledgeable in-house engineers with years of experience. We can offer a service ranging from the supply of pre-insulated pipe to a complete package that incorporates sizing, design, drawings, and installation. We can assist as much or as little as you require.
We have worked on many district heating projects in the past, including one of the largest polymer district heating networks in the UK, where over 7km of pre-insulated pipe was used. You can trust us with your project.