Throughout September, get £10 off each BM4 & BR4 Leister igniter. Offer ends 30th September. Use code: LEISTER10. Dismiss
EX VAT
INC VAT
LoCO2 Heat are pre-insulated pipe and district heating specialists, and have direct relationships with the following pipe suppliers; Rehau, Uponor and CPV in Pex, copper and stainless steel.
We specialise in the supply of underground pre-insulated pipe and fittings for heat distribution and cooling networks. It also commonly gets referred to as underground heat main or district heating pipe, but whatever you decide to call it, we supply it.
District heating networks are the most common use for pre-insulated pipe. This is essentially where a single centralised heat source such as a biomass boiler, is used to heat multiple buildings as opposed to using single boilers in each. Here, pre-insulated pipe is used to connect the single heat source to multiple buildings to provide all the heat and hot water requirements. District heating networks have become increasingly popular, with many new build estates heated via this sort of network as not only can the capital cost overall be less, but it is considered a more efficient way of heating buildings so lowers operation cost and helps minimise carbon emissions.
Showing 81–96 of 258 results
Rauthermex Rubber End Cap The Rehau Rauthermex Rubber end cap is suitable for the protection of foamed pipe ends from moisture. Fits Rauthermex Uno pipe 125/202 & 140/202.
Rauthermex Rubber End Cap The Rehau Rauthermex Rubber end cap is suitable for the protection of foamed pipe ends from moisture. Fits Rauthermex Uno pipe 160/250.
Rauthermex Rubber End Cap The Rehau Rauthermex Rubber end cap is suitable for the protection of foamed pipe ends from moisture. Fits Rauthermex Uno pipe 25/91, 32/91 & 40/91.
Rauthermex T-Shroud for Branches The RAUTHERMEX T-Shroud includes: Shroud set made from ABS (76/126 or 76/182) 16 or 22 clips made from POM Shroud Plugs made from POM including valve. sealing ring and plug (3) Shroud Glue Assembly instructions You will also need a foam kit & two sealing rings of the corresponding size.
Rehau 110mm/160mm Uno Lead in Bend The Rehau pre-fabricated lead-in bends enable the creation of tensionless wall entries that are bent up to 90 degrees to the piping. To be used with Rauthermex and Rauvitherm pipe. Connect other pipes using the standard I-shroud connection.
Rehau 125mm/200mm Uno Lead in Bend The Rehau pre-fabricated lead-in bends enable the creation of tensionless wall entries that are bent up to 90 degrees to the piping. To be used with Rauthermex and Rauvitherm pipe. Connect other pipes using the standard I-shroud connection.
Rehau 160mm/250mm Uno Lead in Bend The Rehau pre-fabricated lead-in bends enable the creation of tensionless wall entries that are bent up to 90 degrees to the piping. To be used with Rauthermex and Rauvitherm pipe. Connect other pipes using the standard I-shroud connection.
Rehau 25mm+25mm/110mm Duo Lead in Bend The Rehau pre-fabricated lead-in bends enable the creation of tensionless wall entries that are bent up to 90 degrees to the piping. To be used with Rauthermex and Rauvitherm pipe. Connect other pipes using the standard I-shroud connection.
REHAU’s 2K-D foam cans are designed for improved safety and handling on site, whilst still using high quality polyurethane foam. Instead of 6 di erent foam bottle sizes, there is only 1 can size which is used in multiples. It can be used over a longer time period than foam mixed on site and it’s…
Rehau 32mm/90mm Uno Lead in Bend The Rehau pre-fabricated lead-in bends enable the creation of tensionless wall entries that are bent up to 90 degrees to the piping. To be used with Rauthermex and Rauvitherm pipe. Connect other pipes using the standard I-shroud connection.
Rehau 32mm+32mm/110mm Duo Lead in Bend The Rehau pre-fabricated lead-in bends enable the creation of tensionless wall entries that are bent up to 90 degrees to the piping. To be used with Rauthermex and Rauvitherm pipe. Connect other pipes using the standard I-shroud connection.
Rehau 40mm/90mm Uno Lead in Bend The Rehau pre-fabricated lead-in bends enable the creation of tensionless wall entries that are bent up to 90 degrees to the piping. To be used with Rauthermex and Rauvitherm pipe. Connect other pipes using the standard I-shroud connection.
Rehau 40mm+40mm/125mm Duo Lead in Bend The Rehau pre-fabricated lead-in bends enable the creation of tensionless wall entries that are bent up to 90 degrees to the piping. To be used with Rauthermex and Rauvitherm pipe. Connect other pipes using the standard I-shroud connection.
Rehau 50mm/90mm Uno Lead in Bend The Rehau pre-fabricated lead-in bends enable the creation of tensionless wall entries that are bent up to 90 degrees to the piping. To be used with Rauthermex and Rauvitherm pipe. Connect other pipes using the standard I-shroud connection.
Rehau 50mm+50mm/160mm Duo Lead in Bend The Rehau pre-fabricated lead-in bends enable the creation of tensionless wall entries that are bent up to 90 degrees to the piping. To be used with Rauthermex and Rauvitherm pipe. Connect other pipes using the standard I-shroud connection.
Rehau 63mm/125mm Uno Lead in Bend The Rehau pre-fabricated lead-in bends enable the creation of tensionless wall entries that are bent up to 90 degrees to the piping. To be used with Rauthermex and Rauvitherm pipe. Connect other pipes using the standard I-shroud connection.
LoCO₂ Heat has a team of highly knowledgeable in-house engineers with years of experience. We can offer a service ranging from the supply of pre-insulated pipe to a complete package that incorporates sizing, design, drawings, and installation. We can assist as much or as little as you require.
We have worked on many district heating projects in the past, including one of the largest polymer district heating networks in the UK, where over 7km of pre-insulated pipe was used. You can trust us with your project.